GYTC8S 4 6 8 12 24 36 48Core Self Supporting Figure 8 Outdoor Single ModeFiber Optic Cable 

Short Description:

The double-core 8 figure optical cable adopts φ600μm or φ900μm tight buffer optical fiber as the optical transmission medium, and is covered with a layer of high-quality aramid yarn. Gytc8s/Gytc8a outdoor communication Self Supporting Aerial Cable Figure fig 8 fiber optic cable 48 core.As the central strength, the steel-wire strength member improves the tensile strength. In addition, it is surrounded by the loose tube and water blocking system.

Product Detail




Product Tags

The multi-purpose wiring cable uses multiple φ900μm flame-retardant tight buffer optical fibers as the transmission medium, and is equipped with a layer of high-quality aramid yarn. The outer layer is covered by a layer of polyvinyl chloride (PVC) or low-smoke zero halogen material (LSZH).

12 core multi-purpose wiring cable
Aramid yarn reinforced strength member with excellent lateral pressure and tensile properties

Single core cable (2)

Single core cable (2)

Single core cable (2)

Single core cable (2)

Single core cable (2)

1.It is widely used in data room, telecommunication engineering and other complex scenes

2.High quality rubber coat, with good flame retardant anti-corrosion effect, high strength, aging resistance, easy to peel, long service life, good bending performance

3.Adopt hengtong and changfei G657A2 bending resistant fiber.The bending radius is only 7.5mm(the G652D fiber commonly used by online merchants has a large bending loss and is prone to poor product signal, so it is not suitable for FTTH wiring).The cost of bending resistance is about twice that of ordinary optical fibers.Changfei, fiberhome, tongding and other big brands are also using G657A fiber.

  • Previous:
  • Next:

  • 1.Tight buffer fiber for easy stripping
    2.Aramid yarn reinforced strength member with excellent lateral pressure and tensile properties
    3.Low-smoke zero halogen flame retardant polyolefin (LSZH) with excellent flame retardant

    Indoor cable distribution
    Main wiring cable
    Multi-core fiber optic connection patch cord

    Meet YD/T 1258.2, ICEA-596, GR-409, IEC60794-2-10/11 and other standards

     Structural parameters

    Cable Code Cable Diameter(Ref)mm Cable Weight(Ref)kg/km Tensile StrengthLong/Short term N Crush ResistanceLong/Short term N/100mm Bending RadiusDynamic/Static mm
    PVC Jacket LSZH Jacket
    MPCX-XX-04Xn 4.8±0.3 16 18 130/440 300/1000 20D/10D
    MPCX-XX-06Xn 5.1±0.3 20 23 130/440 300/1000 20D/10D
    MPCX-XX-08Xn 5.6±0.3 27 31 130/440 300/1000 20D/10D
    MPCX-XX-12Xn 6.2±0.3 32 36 130/440 300/1000 20D/10D
    MPCX-XX-24Xn 8.1±0.3 53 57 200/660 300/1000 20D/10D


    Optical properties

    Fiber Type Attenuation (OFL) Effective mode bandwidth 10G Ethernet link length SX Minimum bending radius
    Condition 1310/1550nm 850/1300nm 850/1300nm 850nm 850nm /
    Typical value Max Typical value Max
    Unit dB/km dB/km dB/km dB/km m mm
    G652D 0.36/0.22 0.5/0.4 16
    G657A1 0.36/0.22 0.5/0.4 10
    G657A2 0.36/0.22 0.5/0.4 7.5
    OM2 3.0/1.0 3.5/1.5 ≥500/500 30
    OM1 3.0/1.0 3.5/1.5 ≥200/500 30
    OM3 3.0/1.0 3.5/1.5 ≥1500/500 ≥2000 ≤300 30
    OM4 3.0/1.0 3.5/1.5 ≥3500/500 ≥4700 ≤550 30
    BI-OM3 3.0/1.0 3.5/1.5 ≥1500/500 ≥2000 ≤300 7.5
    BI-OM4 3.0/1.0 3.5/1.5 ≥3500/500 ≥4700 ≤550 7.5

    Transport/Storage/Operating Temperature:-20℃-+60℃,

    Installation Temperature:-5 ℃ -+50℃


    Write your message here and send it to us